Reset Switch; Rsm: Reset Switch - 3Com CoreBuilder 9000 User Manual

Reset Switch

Reset the active switch fabric module. After the switch has been reset,
the system is rebooted.
While the system reboots (approx. 5 minutes), the standby switch
automatically becomes active.
When the standby switch fabric module is active, a new main menu
containing the following four options is displayed:


(1) Display Switch status. For details, see "Display Switch
Fabric Module Status" on page 95.


(2) Reset Standby Switch Fabric Module. For details, see
"Reset Standby Switch Fabric Module" on page 98.


(3) Logout. For details, see "Logout" on page 110.


(4) Version. For details, see "Display Software Versions" on
page 114.
Command Actions
Enter the menu sequence: (1) SYS: Platform configuration
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
The following prompt is displayed:
Do you really want to reboot the switch? [y/n]y
The switch is rebooted and the following messages are displayed:
Bootstrap
Moving the file from FLASH to DRAM ....
Going to operational code ....
(4) SWM: Switch modules
1 4 2
The active switch fabric module is reset.
Information is displayed as shown in the example.
1 4 2
V1.10 Jul
============================
Managing Switch Fabric Modules

(2) RSM: Reset Switch

7 1998
CB9000 3Com NCD
97