3Com CoreBuilder 9000 User Manual page 133

Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
ATM Addresses Port Table
(1) ADD: Get ATM Addresses
(1) UME: Get UME Addresses at Port
Format or Range
<slot.group.port> (0.0 for all ports)
3 1 1 [parameters]
The UME addresses for the specified port or for all
ports are displayed.
Information is displayed as shown in the example.
133