72
C
5: C
HAPTER
ONFIGURING THE
Display Current IP
Subnet Mask
P
LATFORM
Display the current IP subnet mask of the CoreBuilder 9000 ATM
Enterprise Switch. The IP subnet mask is used in conjunction with the IP
address.
Command Actions
Enter the menu sequence: (1) SYS: Platform Configuration
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 2 4 1
The following message is displayed:
Current Subnet Mask address: 255.255.255.0.
The current IP subnet mask configuration is displayed.
(1) SET: Switch Setup
(2) MNG: Management Setup
(4) MSK: Subnet Mask Setup
(1) GSM: Get Subnet Mask
1 1 2 4 1
The current IP subnet mask configuration is displayed.
Current Subnet Mask address: