Simple Positioning Function By Parameters - Mitsubishi Electric FR-A820-00046 Instruction Manual

Hide thumbs Also See for FR-A820-00046:

Table of Contents

Position control under vector control and PM sensorless vector control

Simple positioning function by parameters

Set positioning parameters such as the number of pulses (position) and acceleration/deceleration

time in advance to create a point table (point table method). Positioning operation is performed by

selecting the point table.

Position command source selection

Digital position control sudden stop

deceleration time

First target position lower 4 digits

First target position upper 4 digits

Second target position lower 4 digits

Second target position upper 4

Third target position lower 4 digits

Third target position upper 4 digits

Fourth target position lower 4 digits

Fourth target position upper 4 digits

Fifth target position lower 4 digits

Fifth target position upper 4 digits

Sixth target position lower 4 digits

Sixth target position upper 4 digits

Seventh target position lower 4

Seventh target position upper 4

Eighth target position lower 4 digits

Eighth target position upper 4 digits

Ninth target position lower 4 digits

Ninth target position upper 4 digits

Tenth target position lower 4 digits

Tenth target position upper 4 digits

Initial value

Setting range Description

Simple position control by point

tables (position command by setting

parameters).

Simple pulse train command by

inverter pulse input.

Set the time period until the inverter

stops when the forward rotation

(reverse rotation) command is

turned OFF with the position feed

forward function.

Set the target position of point table