Installation and wiring
Wiring of control circuit
Control circuit terminal layout
This terminal operates as the terminal FM for the FM type, and as the terminal CA for the CA type.
● Power supply connection
For the control circuit wiring, strip off the sheath of a cable, and use it with a blade terminal. For a sin-
gle wire, strip off the sheath of the wire and apply directly.
Insert the blade terminal or the single wire into a socket of the terminal.
Strip off the sheath for the below length. If the length of the sheath peeled is too long, a short
circuit may occur with neighbouring wires. If the length is too short, wires might come off.
Wire the stripped cable after twisting it to prevent it from becoming loose. In addition, do not
1 F/C +24 SD
5 10E 10 SE SE
Cable stripping size
Preparation of the cable
S1 S2 PC
IPF OL FU
PC RL RM RH RT AU
STP MRS RES
STF STR JOG
2 - 43