Parameter Copy - Mitsubishi Electric FR-A820-00046 Instruction Manual

Hide thumbs Also See for FR-A820-00046:
Table of Contents

Advertisement

Copying and verifying parameters on the operation panel
5.18.1

Parameter copy

Inverter parameter settings can be copied to other inverters.
Reading the parameter settings of the inverter to the operation panel
Connect the operation panel to the source inverter.
Parameter setting mode
Press
Selecting the parameter number
Turn
"
Reading to operation panel
Turn
the operation panel. (It takes about 30 seconds to read all the settings. During reading, "
End reading
"
Tab. 5-320: Reading the parameter settings of the inverter to the operation panel
NOTE
Parameter read error. Perform the operation from step
Copying parameter settings read to the operation panel to the inverter
Connect the operation panel to the destination inverter.
Parameter setting mode
Press
Selecting the parameter number
Turn
"
Selecting parameter copy
Turn
Copying to the inverter
Press
selected parameter group flickers.)
Perform this step while the inverter is stopped. (Parameter settings cannot be copied during operation.)
Ending copying
"
When parameters are written to the destination inverter, reset the inverter before operation by, for example, turning
the power supply OFF.
Tab. 5-321: Copying parameter settings read to the operation panel to the inverter
5 - 702
to choose the parameter setting mode. (The parameter number read previously appears.)
to
(parameter copy), and press
" appears.
to change the set value to "
" and "
" flicker alternately after settings are read.
appears... Why?
to choose the parameter setting mode. (The parameter number read previously appears.)
to
(parameter copy), and press
" appears.
to change the setting value to "
appears.
to start copying to the inverter. (It takes about 60 seconds to copy all the settings. During copying, the
" and "
" flicker alternately after copying ends.
Operation
.
". Press
to start reading of the inverter parameter settings by
again.
Operation
.
" and press
.
Parameters
" flickers.)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents