Parameter Clear / All Parameter Clear - Mitsubishi Electric FR-A820-00046 Instruction Manual

Parameter clear / all parameter clear

5.17 Parameter clear / all parameter clear
NOTES Set "1" to Pr.CLR "Parameter clear", ALL.CL "All parameter clear" to initialize all parameters. (Param-
eters cannot be cleared when Pr. 77 "Parameter write selection" = "1".)
Pr.CL does not clear calibration parameters or the terminal function selection parameters.
Refer to the parameter list on page A-5 for parameters cleared with this operation.
Screen at power-ON
The monitor display appears.
Changing the operation mode
Press
Parameter setting mode
Press
Selecting the parameter number
To perform a parameter clear, turn
press
Parameter clear
Turn
(
Turn
Press
Press
Tab. 5-317: Parameter clear
Setting
0
1
Tab. 5-318: Parameter clear and all parameter clear
5 - 700
to choose the PU operation mode. [PU] indicator is lit.
to choose the parameter setting mode. (The parameter number read previously appears.)
and
. " " (initial value) appears.
to change the set value to "
) flicker alternately after parameters are cleared.
to read another parameter.
to show the setting again.
twice to show the next parameter.
Pr.CLR Parameter clear
Parameters are not cleared.
Returns parameters excluding calibration parameters
and terminal function selection parameters to their
initial values.
Operation
to , and to perform all parameter clear, turn it to
". Press to enter the setting. "
Description
ALL.CL All parameter clear
Returns all parameters which can be cleared including
calibration parameters and terminal function
selection parameters to their initial values.
Parameters
" and " "