(M) Monitor display and monitor output signal
Encoder pulse dividing output
The encoder pulse signal at the motor end can be divided in division ratio set in Pr. 863 and output.
Use this parameter to make the response of the machine to be input slower, etc. The FR-A8TP is re-
The parameter above can be set when the FR-A8TP (option) is installed.
● Division waveform by division ratio
Both ON-OFF width is division times. (50% duty)
● Pulse waveform example at 1000 pulse input when Pr. 863 = "2"
Control of forward rotation/reverse rotation by phase difference between A phase and B phase:
● When A phase is 90° advanced as compared to B phase: forward rotation
● When A phase is 90° behind as compared to B phase: reverse rotation
5 - 388
Control terminal option-
Encoder pulse division ratio
Division ratio 1/1
Division ratio 1/2
Pulse waveform when Pr. 863 = "2"
Setting range Description
1 to 32767
Set a numerical value by which pulses are