Jog Operation From The Operation Panel - Mitsubishi Electric FR-A820-00046 Instruction Manual

Basic operation
4.7.2

JOG operation from the operation panel

NOTE Operate only while FWD or REV key is pressed.
Example Operation example: Operate at 5 Hz.
Screen at power-ON
The monitor display appears.
Changing the operation mode
Press
Start ➔ acceleration ➔ constant speed
Keep pressing
deceleration time", and "
Deceleration ➔ stop
Release
time", and the motor stops rotating with "
Tab. 4-22:
NOTES To change the running frequency, change Pr. 15 "Jog frequency" (initial value "5 Hz").
To change the acceleration/deceleration time, change Pr. 16 "Jog acceleration/deceleration time"
(initial value "0.5 s").
Parameters referred to
Pr. 15
Pr. 16
FR-A800
Operation panel
(FR-DU08)
twice to choose the PUJOG operation mode. The monitor displays
or . The frequency value on the indication increases in Pr. 16 "Jog acceleration/
" (5.00 Hz) appears.
or . The frequency value on the indication decreases in Pr. 16 "Jog acceleration/deceleration
JOG operation performed from PU
Jog frequency
Jog acceleration/deceleration time
Basic operation procedure (JOG operation)
Fig. 4-13:
Connection example for jog operation performed
from PU
Operation
" (0.00 Hz) displayed.
I002433E
, and [PU] indicator is lit.
=> page 5-286
=> page 5-286
4 - 31