Mitsubishi Electric FR-A820-00046 Instruction Manual page 394

(E) Environment setting parameters
GOT initial setting (PU connector) (Pr. 999 = "10, 12")
Pr.
79
118
119
120
121
122
123
124
340
414
Tab. 5-83:
When Pr. 414 = "1", the setting value is not changed.
● Initial setting with the GOT2000 series
– When "FREQROL 500/700/800, SENSORLESS SERVO" is selected for "Controller Type" in the GOT
setting, set Pr. 999 = "10" to configure the GOT initial setting.
– When "FREQROL 800(Automatic Negotiation)" is selected for "Controller Type" in the GOT
setting, the GOT automatic connection can be used. When "FREQROL 800(Automatic Negoti-
ation)" is selected for "Controller Type" in the GOT setting and the GOT automatic connection
is not used, set Pr. 999="12" to configure the GOT initial setting. (Refer to page 5-649 .)
● Initial setting with the GOT1000 series
– Set Pr. 999 = "10" to configure the GOT initial setting.
NOTES Always perform an inverter reset after the initial setting.
For the details of connection with GOT, refer to the Instruction Manual of GOT.
5 - 214
Name
Operation mode selection
PU communication speed
PU communication stop bit length
PU communication parity check
Number of PU communication retries
PU communication check time interval
PU communication waiting time setting
PU communication CR/LF selection
Communication startup mode selection
PLC function operation selection
GOT initial setting (PU connector)
Initial
Pr. 999 = "10" Pr. 999 = "12"
value
0 1
192 192
1 10
2 1
1 9999
9999 9999
9999 0 ms
1 1
0 0
0 —
Parameters
Refer to page
1 5-263
1152
0
1
9999 5-610
9999
0 ms
1
0 5-272
5-587
2