Pu Display Language Selection - Mitsubishi Electric FR-A820-00046 Instruction Manual

(E) Environment setting parameters
5.7.3

PU display language selection

The display language of the parameter unit (FR-PU07) can be selected.
Pr.
145
E103
5.7.4 Buzzer control
The buzzer can be set to "beep" when the keys of the operation panel and the parameter unit are op-
erated.
Pr.
990
E104
NOTE When with buzzer is set, the buzzer sounds if an inverter fault occurs.
5.7.5 PU contrast adjustment
Contrast adjustment of the LCD of the LCD operation panel (FR-LU08) and the parameter unit
(FR-PU07) can be performed.
Decreasing the setting value makes the contrast lighter.
Pr.
991
E105
The above parameter is displayed as a simple mode parameter only when the LCD operation panel
(FR-LU08) and the parameter unit (FR-PU07) is connected.
5 - 196
Name
PU display language selection
Name
PU buzzer control
Name
PU contrast adjustment
Initial value Setting range
0
1
2
3
1
4
5
6
7
Initial value Setting range
0
1
1
Initial value Setting range
58 0 to 63
Parameters
Description
Japanese
English
German
French
Spanish
Italian
Swedish
Finnish
Description
Without buzzer
With buzzer
Description
0: Low → 63: High