D) Operation Command And Frequency Command - Mitsubishi Electric FR-A820-00046 Instruction Manual

(D) Operation command and frequency command

5.9 (D) Operation command and frequency command
Purpose
To select the operation mode
To start up in Network operation
mode at power-ON
To select the command source
during communication operation
To prevent motor from rotating
reversely
To change the setting resolution of
speed
To change the setting resolution of
torque limit
To set the frequency by pulse train
input
To perform JOG operation
To control frequency with
combinations of terminals
To select torque command method
during torque control
5 - 262
Parameter to set
Operation mode selection
Communication startup
mode selection
Operation and speed
command sources during
communication operation,
command source selection
Reverse rotation prevention
selection
Set resolution switchover
Set resolution switchover
Pulse train input
JOG operation
Multi-speed operation
Torque command source
selection
P.D000 Pr. 79
P.D000, P.D001 Pr. 79, Pr. 340
Pr. 338, Pr. 339,
P.D010 to P.D013
Pr. 550, Pr. 551
P.D020 Pr. 78
P.D030 Pr. 811
P.D030 Pr. 811
P.D100, P.D101, Pr. 291,
P.D110, P.D111 Pr. 384 to Pr. 386
P.D200, P.F002 Pr. 15, Pr. 16
Pr. 28,
Pr. 4 to Pr. 6,
P.D300 to P.D315
Pr. 24 to Pr. 27,
Pr. 232 to Pr. 239
P.D400 to P.D402 Pr. 804 to Pr. 806
Parameters
Refer to
page
5-263
5-272
5-274
5-281
5-324
5-324
5-282
5-286
5-288
5-132