Mitsubishi Electric FR-A820-00046 Instruction Manual page 769

Parameters
Copying the PLC function project data to USB memory
● This function copies the PLC function project data to a USB memory device.
The PLC function project data copied in the USB memory device can be copied to other inverters.
This function is useful in backing up the parameter setting and for allowing multiple inverters to
operate by the same sequence programs.
● Refer to page 2-58 for an outline of the USB communication function.
Monitor mode
USB memory mode
Project data file
number (displays 1
to 99, unrelated to
the number of files
saved in the USB
memory device)
Fig. 5-295: Copying the PLC function project data to USB memory
FR-A800
Function mode
Parameter setting mode
Faults history mode
Overwrite the inverter project data file onto the
designated file in the USB memory device.
Write the designated project data file of the USB
memory device onto a data file of the inverter.
Verify the designated project data file of the USB
memory device against the project data file of the
inverter.
(A) Application parameters
I002722E
5 - 589