Monitoring The Inverter Status - Mitsubishi Electric FR-A820-00046 Instruction Manual

Basic operation
4.2

Monitoring the inverter status

4.2.1 Monitoring of output current and output voltage
NOTE Pressing the SET key in the monitor mode switches the monitored item to output frequency, out-
put current, and then to output voltage.
Press
[Hz] indicator turns ON.
Press
This operation is valid during running or stopping under any operation mode.
[A] indicator turns ON.
Press
[V] indicator turns ON.
Tab. 4-4:
NOTE Other monitored items, such as output voltage and set frequency, are also available. Use Pr. 52 to
change the setting. (Refer to page 5-327.)
4.2.2 First monitored item
The first monitored item to be displayed in the monitor mode is selectable. To set a monitored item
as the first monitored item, display a monitored item, and press the SET key for a while.
Example Changing example:
Set the output current as the first monitored item.
Select the monitor mode, and select the output current.
Press
The output current is set as the first monitored item.
When the monitor mode is selected next time, the output current is monitored first.
Tab. 4-5:
NOTE Use Pr. 774 "Operation panel monitor selection 1" to change the monitored item.
(Refer to page 5-327.)
FR-A800
during operation to monitor the output frequency.
to monitor the output current.
to monitor the output voltage.
Monitoring of output current and output voltage
for a while (1 s).
Setting the output current as the first monitored item
Monitoring the inverter status
Operation
Operation
4 - 7