Mitsubishi Electric FR-A820-00046 Instruction Manual page 685

Parameters
Pr.
862
C242
The parameters above are available be set when a vector control compatible option is mounted.
The parameter number is the one for use with the plug-in option (FR-A8AP/FR-A8APR). (Pr. 369 for
the FR-A8AP only)
The parameter number is the one for use with the control terminal option (FR-A8TP).
To perform machine end orientation, the plug-in option (FR-A8AP/FR-A8APR) and control terminal
option (FR-A8TP) are required.
When the second motor is selected, the orientation control is disabled.
FR-A800
Name
Encoder option selection
Initial Setting
Description
value range
First motor: plug-in option
that supports the vector
control Second motor: control
0
terminal option that supports
the vector control
First motor: control terminal
option that supports the
0 vector control Second motor:
plug-in option that supports
the vector control
1
Motor end: control terminal
option that supports the
vector control Machine end:
plug-in option that supports
the vector control
(A) Application parameters
Machine end orientation
invalid
Machine end orientation
invalid (when Pr. 393 = "0,
1, or 2")
Machine end orientation
valid (when Pr. 393 = "10,
11, or 12")
5 - 505