Mitsubishi Electric FR-A820-00046 Instruction Manual page 215

Parameters
Changing parameter settings in the group parameter display
Example Changing example:
Change the P.H400 (Pr. 1) "Maximum frequency".
Screen at power-ON
The monitor display appears.
Changing the operation mode
Press
Parameter setting mode
Press
Parameter group selection
Press
Parameter group selection
Turn
make the group parameters of the protective function parameter 4 selectable.
Parameter selection
Turn
"
Changing the setting value
Turn
"
Tab. 5-5:
FR-A800
to choose the PU operation mode. [PU] indicator is lit.
to choose the parameter setting mode. (The parameter number read previously appears.)
several times until
until (protective function parameter 4) appears. Press
until (P.H400 "Maximum frequency") appears. Press
" (initial value) appears.
to change the set value to "
" flicker alternately after the setting is completed.
Changing the parameter setting
Operation
appears. Parameter groups can now be selected.
". Press to enter the setting. "
Parameter List
to display and
to read the present set value.
" and
5 - 35