Mitsubishi Electric FR-A820-00046 Instruction Manual page 770

(A) Application parameters
● The following data can be copied by copying the project data via USB memory.
Extension
.QPA
.QPG
.C32
.QCD
.DAT
.TXT
Tab. 5-253: Data, that can be copied
NOTE If the project data of the PLC function is locked with a password using FR Configurator2, copying
to the USB memory device and verification are disabled. Also if set to write-disabled, writing to the
inverter is disabled. For the details of the PLC function, refer to the PLC Function Programming
Manual and the Instruction Manual of FR Configurator2.
Parameters referred to
Pr. 338
5 - 590
File type
Parameter file
Program file
Function block source information
Global text comment information
Project management information
Copy information
Communication operation command source
Copy from inverter to USB
memory
Supported
Supported
Supported
Supported
Supported
Supported
Parameters
Copy from USB memory
to inverter
Supported
Supported
Supported
Supported
Not available
Not available
=> page 5-274