Configuring Cameras - Avaya Scopia XT Series Deployment Manual

Field Name
PIP - Size
7. From the web interface only, select Save.
Related links
Initial Configuration of the XT Series

Configuring Cameras

About this task
Configure the camera depending on the type of camera, its functionality, and how it is connected
to the XT Series. For more information about connecting your camera to the XT Codec Unit, see
Connecting Cameras or DVD players
In this section, first define which camera is the unit's default camera and other general properties,
then define each camera's settings by configuring the port connection.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Connect the video equipment, as described in
Procedure
1. Access the camera settings. From the XT Series web interface, select Administrator
settings > I/O connections > Cameras > General. From the endpoint's main menu,
select Configure > Advanced > I/O connections > Cameras > General.
December 2017
Description
• Clockwise rotates the overlapped image clockwise.
• Counterclockwise rotates the overlapped image anti-clockwise.
Select from Small or Medium sizes.
on page 93
on page 41.
Figure 69: Configuring general camera settings from the web interface
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
on page 122.
Connecting Cameras or DVD players
Configuring Cameras
on page 41.
111