Enabling Advanced Maintenance On The Xt Series - Avaya Scopia XT Series Deployment Manual

Advanced Configuration of the XT Series
Adding your own jingle
Expanding capacity by joining MCUs together
Configuring Multi-Stream Switching (MSS) video

Enabling Advanced Maintenance on the XT Series

About this task
To perform advanced configuration and maintenance from the endpoint itself, like upgrading the
firmware, you must first enable access to the advanced settings.
Before you begin
Ensure that you have the password to access the Advanced settings. The default password is
1234.
Procedure
1. Access basic settings. From the XT Series web interface, select Basic Settings >
Preferences > General. From the endpoint's main menu, select Configure > General.
2. Set Show Advanced Settings to Yes.
3. From the XT Series web interface, select Administrator Settings. From the endpoint,
press Back
4. Enter the password to display the Advanced screen. The default password is 1234.
December 2017
on page 189
and then select Advanced.
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
on page 191
on page 193
[1...96]
122