Configuring Enhanced Lecture Mode; Configuring Wrap-Around Navigation - Avaya Scopia XT Series Deployment Manual

Configuring Enhanced Lecture Mode

About this task
You can configure the XT Series to display the Continuous Presence (CP) of the other participants
to the lecturer, while the other participants see the lecturer only. Alternatively, you can configure
the XT Series to display both the lecturer video and the video of the previous or active speaker to
everyone, including the lecturer. In this layout, the lecturer video is displayed as a large image and
the previous or currently active speaker is displayed as a small image.
Procedure
1. Access the MCU settings. From the XT Series web interface, select Administrator
Settings > Calls > Preferences > MCU. From the endpoint's main menu, select
Configure > Advanced > Calls > Preferences > MCU.
2. For the Default Lecturer Layout, choose from the following options:
• Select 1 terminal to enable enhanced lecture mode. In enhanced lecture mode, the XT
Series hosting the meeting sends the local participant video as the lecturer, while the
lecturer can see the Continuous Presence (CP) of other participants. This is the default
behavior.
• Select 2 terminals — A to send everyone, including the lecturer, the lecturer video as a
large display and the video of the previous/active speaker as a small display.
3. From the web interface only, select Save.
Related links
Advanced Configuration of the XT Series

Configuring Wrap-around Navigation

About this task
You can configure the XT Series to enable users to cycle among available menu items in some
user interface panels using the arrows. The selection restarts from the farthest item in the same
direction, if no other items are available.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Procedure
1. Access the customization settings. From the XT Series web interface, select
Administrator Settings > System > Customization > General. From the endpoint's main
menu, select Configure > Advanced > System > Customization > General.
December 2017
on page 121
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Configuring Enhanced Lecture Mode
on page 122.
167