What’s New This section describes some enhancements and fixings available in this software version 9.1.0.37 since previous Avaya XT Series GA version, v9.0.2.44. Time Settings In this release, SNTP Servers returned by DHCP (DHCP Option 42, NTP/SNTP RFC 1769), if available, are preferred to some public Internet Servers for automatic configuration.
Page 8
(when using a single monitor). If you use an Avaya XT Camera Switch, you need to connect it to HD2 in place of HD1. Audio on HD2 is automatically disabled, while audio on HD1 is enabled. This means that audio coming from the PC for a presentation via HD1 cable is also transmitted.
Improved video interoperability with Equinox Clients when XT is acting as MCU. Improved SIP outgoing-call management when registered to Avaya AURA: if the remote answers with an SDP where all media lines (except for the audio one) are zeroed, the call is considered audio-only.
You can now “filter" logs when creating a CS package. See Serviceability Enhancement, Customer Support Package with Last Minutes Filter. An Avaya Policy Disclaimer has been added for Customer Support Package or diagnostic tools. What’s New | 21 Release Notes for Avaya Scopia® XT Series...
Avaya Media Server 9.0.x (AMS) to distribute multiple video streams to each MSS aware participant. The MSSv1 is implemented by XT in this release and it involves these products in Avaya Equinox Solution 9.1: XT Series endpoints, Avaya Equinox Clients, Avaya AURA, Equinox Management and AMS (Avaya Media Server).
EASG is also required to enable remote proactive support tools, where applicable. The customer can enable EASG and this will allow Avaya services logins (as sroot). Once EASG is enabled it will remain enabled (even across updates or upgrades) until it is explicitly disabled by the customer.
Page 24
Figure 22: EASG Challenge If the technicians can connect to the Avaya network, they will be able to generate a response to the challenge above via the EASG Web Mobile Avaya service, using the challenge info and the What’s New | 24...
Page 25
An alternative method using EASG site certificates can be used if there is no connection to the Avaya network onsite. Site certificates are used by the onsite technicians not having access to the Avaya network to generate a response to the Enhanced Access Security Gateway (EASG) challenge. The technician will generate and provide the site certificate to the customer prior to going onsite.
Release 9.0 introduces also relevant improves in software upgrade security, using signed software packages. Signed Software Packages Since release 9.0, XT Series software packages are signed by an Avaya Certificate Root Authority recognized by the XT Series. Only verified signed software packages will be accepted by XT Series once upgraded to this release.
Release 9.0 improves security when upgrading. Since this version, XT Series software packages are signed by an Avaya Certificate Root Authority recognized by the XT Series. Only signed packages will be accepted by XT Series once upgraded to this version (see XT Software Update Verification Table).
USB key and insert it into the upper USB socket. Important Since version 9.0 is a Major Release for Avaya XT Series, a new license might be required for this upgrade if the endpoint is not under Maintenance Contract.
XT Desktop 8.3.800 minimum is suggested. Important It is always recommended to update the Avaya Equinox Solution to the latest release. Solution wide features like Mobile Link or Auto-Provisioning require that the Avaya Equinox Solution as a whole is up to date and all components support those features.
Avaya performs effective testing of each software version. Patch software may be available to fix known issues of this software version. Please contact Avaya’s Customer Support Service for further information. This section details the list of known issues for this version. Issues are common to Avaya XT Series. Table 7:...
Page 45
GUI Configure > General > Remote Control Code or in the Web > Basic Settings > General > Remote Control Code. Codes 97, 98, 99 are reserved to control an Avaya XT Series XT Deluxe Camera, and cannot be used to control the Codec Unit. ...
Page 46
Configure > General > Remote Control Code or in the Web > Basic Settings > General > Remote Control Code. Codes 97, 98, 99 are reserved to control an Avaya XT Series Deluxe Camera, and cannot be used to control the Codec Unit.
For more information about integrating XT Endpoints in with Avaya Aura see also https://downloads.avaya.com/css/P8/documents/100180521 For more information about the complete set of products offered in the Avaya Equinox Solution, see http://www.avaya.com For support on Avaya products and to get latest available references for the above documents, see http://support.avaya.com...
Third Party Open Source License Copyright and Credits info and Commercial License Agreement for Avaya XT Series Products are available at http://support.avaya.com/Copyright Avaya XT Series devices include AAC-ELD technologies licensed by Fraunhofer IIS; see http://www.iis.fraunhofer.de/amm Release Notes for Avaya Scopia® XT Series Copyright, Licensing and Credits | 49...