Avaya Scopia XT Series Deployment Manual page 161

Field
Digital Signature
Save to External
Server
External Server Type
FTP Server URL
FTP Server User
FTP Server Password
FTP Secure
Connection
AESR File Owner
AESR Server Tenant
ID
Use the following table as a guide to determine the best bit rate to use, depending on the
resolution you require and your disk space constraints.
Table 49: Typical file sizes based on the bitrate
Bitrate
6144K
4096K
2048K
December 2017
Description
Select Yes to activate a digital signature of the recorded video. When the video is
recorded, the XT Series generates a hash of the video file using a certificate uploaded
by the customer. The XT Series creates a p7m file together with the video file. The
p7m file contains the signed hash and you can use it to verify that the video has not
been altered. For more information, see
If you have not uploaded a valid customer certificate to sign recording files, the XT
Series uses a self-signed certificate to digitally sign recorded files, if a self-signed
certificate has been configured. Self-signed certificates do not assure the same level
of security as certificates signed by an official Certificate Authority (CA). Ensure that
you save your digitally signed certificate in a safe place. When XT Series is restored
to factory settings, your digitally signed certificate is lost. You must upload your
digitally signed certificate to the XT Series if you want to verify the integrity of the
recorded files using the XT Series.
Select Yes to enable saving of your files to an external FTP server.
• Select AESR if you have deployed Avaya Equinox Management with Avaya Equinox
Streaming and Recording Server configured to accept file transfers.
• Select Generic if you want to transfer your file to a standard FTP server. In case of
a generic server, assure that Passive Transfer Mode is enabled on the server.
Type a URL containing the name or the IP address of the FTP server and optionally
the port number (if different from the standard one, 21) and an existing subdirectory
path on the server where your files will be saved. For example:
[ftp://]servername_or_serveraddress[:port][/remotedir/.../]
Type the username to login into the FTP server.
Type the password to login into the FTP server.
Select Yes to ensure that the file transfer is secured using FTPS.
Type the name of the file owner in Avaya Equinox Streaming and Recording Server. It
usually corresponds to a user defined in Avaya Equinox Management.
Type the tenant or organization identification number for the file owner's organization,
as defined in Avaya Equinox Management/Avaya Equinox Streaming and Recording
Server. If your deployment is not configured in multi-tenant mode, use 999.
File size for 1 minute
recording
45 MB
30 MB
15 MB
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Enabling and Configuring Recording
Securing Recordings
File size for 30 minute
recording
1,350 MB
900 MB
450 MB
on page 199.
File size for 1 hour
recording
2,700 MB
1,800 MB
900 MB
Table continues...
161