Avaya Scopia XT Series Deployment Manual page 34

Planning the Topology of the Avaya Scopia
Procedure
1. Access the port settings. From the XT Series web interface, select Administrator
Settings > Networks > Preferences > Dynamic Ports. From the endpoint's main menu,
select Configure > Advanced > Networks > Preferences > Dynamic Ports.
2. Define how the XT Series assigns ports by selecting one of the following from Auto
detect:
• No: The XT Codec Unit uses the range of dynamic ports indicated and allows you to
define the base port (default and recommended setting).
• Yes: The XT Codec Unit assigns ports randomly, and you cannot define the base port.
3. If you selected No in the Automatic list, you can modify the TCP or UDP base port in the
Ports field.
Important:
You can configure the base port to any value between 1024-65535. The number of
ports is calculated automatically by the system, and can be lower than the values
specified above, depending on whether you have an MCU license and its type.
4. From the web interface only, select Save.
Related links
Implementing Port Security for the Avaya Scopia
December 2017
® XT Series Deployment
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
®
XT Series on page 24
34