Disabling Local Audio And Video For Server Deployment - Avaya Scopia XT Series Deployment Manual

Parameter
Verify Certificate Revocation
4. From the web interface only, select Save.
5. (Optional) If you are securing SIP connections using TLS certificates, continue with
Securing Connections to the XT Series Using TLS
Related links
Deploying the XT Series as a Server Only

Disabling Local Audio and Video for Server Deployment

About this task
When you set up the Avaya Scopia
microphone, you need to disable local audio and video in the unit.
Procedure
1. Access the XT Series web interface, as described in
2. Access the call settings. From the XT Series web interface, select Administrator
Settings > Calls > Preferences > General.
December 2017
on page 85
®
XT Series as a server only, with no monitor, camera or
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Disabling Local Audio and Video for Server Deployment
Description
Select No to accept certificates without performing a
'Key Usage' or 'Extended Key Usage' check.
Select Yes always to ensure that the XT Series checks
if the certificate has been revoked. It treats
indeterminate results as failures.
Select Yes if possible to check if the certificate has
been revoked and to reject certificates which have been
known to be revoked but to allow certificates if the result
of the check is indeterminate due to missing revocation
information in the certificate or a failure to check the
revocation status, such as in situations where there is
no response from the OCSP responder, or an inability to
download the CRL, and so on.
Select No to disable certificate checking.
on page 201.
Accessing Web Interface on page 71.
91