Avaya Scopia XT Series Deployment Manual page 236

Troubleshooting the Avaya Scopia
Menus or remote presentation cropped
The system menus or the remote presentation appears to be cropped.
Solution
Adjust the way the image appears on the monitor. To see your adjustments in real-time, we
recommend performing this procedure from the endpoint itself.
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
1. Access the monitor settings. From the XT Series web interface, select Administrator
settings > I/O connections > Monitor > Graphic Adjustments. From the endpoint's
main menu, select Configure > Advanced > I/O connections > Monitor > Graphic
Adjustments.
2. Navigate to the monitor requiring adjustment (Monitor HD1 or Monitor HD2).
3. Select your preferred image view mode.
Table 66: Adjustment options for the monitor
Option
Adjustment Mode
Top, Left, Bottom,
Right
December 2017
® XT Series
Figure 170: Adjusting the monitor
Description
Select Menu, presentation (default) to adjust both the system menu
and presentation, local or received.
Select Menu to adjust the system menus only.
Note:
Adjustment Mode is not applicable to 4K monitors.
Drag the sliders to the required sizes until the menu or presentation
borders are visible on the monitor.
You can also adjust the image for the monitor displaying the system
menu, in the quick setup wizard as described in
Position on page 98.
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
on page 122.
Adjusting the Image
236