Avaya Scopia XT Series Deployment Manual page 232

Troubleshooting the Avaya Scopia
Solution
1. Access audio tests. From the XT Series web interface, select Diagnostics > I/O
Connections > Audio > Tests. From the endpoint's main menu, select Configure >
System Status > Diagnostics > I/O Connections > Audio > Tests.
Figure 166: Performing the audio tests from the web interface
2. Select Loc tone
completed successfully.
Figure 167: The audio test completed successfully from the web interface
3. Select Tx tone
endpoint. If the test is completed successfully, the Done message is displayed.
December 2017
® XT Series
to check the audio input received by the endpoint. Verify the test
to check the audio output sent from the local endpoint to the connected
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
232