Avaya Scopia XT Series Deployment Manual page 180

Advanced Configuration of the XT Series
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Procedure
1. Access the remote download settings. From the endpoint's main menu, select
Administrator Settings > Utilities > Remote Access > Download. From the XT Series
web interface, select Configure > Advanced > Utilities > Remote Access > Download.
2. Set the fields as described in
Table 57: Enabling remote upgrades
Field Name
Download Management
Enable All Addresses
Addresses
Subnet Mask
Password Protect
Password
December 2017
Figure 120: Enabling remote access to the XT Series
Table 57: Enabling remote upgrades
Description
Select Yes to enable upgrades.
Select Yes to enable remote upgrades from any IP address. Select
No to restrict access from a specified range of addresses only,
defined in the Address and Subnet mask fields in this screen.
Specify the IP address allowed to upgrade this device remotely (only
relevant if you set the Enable all addresses field to No). This can
represent a range of addresses in conjunction with the Subnet Mask
field.
Turn the above Address field into a range of addresses by defining its
subnet mask. This range represents the addresses allowed to
upgrade this device remotely (only relevant if you set the Enable all
addresses field to No).
Select Yes to ensure that a mandatory password is entered before
initiating the upgrade. Select No to disable password protection.
You can define a password that must be inserted before initiating the
upgrade. Note than when defining a password, only interactive
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
on page 122.
on page 180.
Table continues...
180