Upgrading The Avaya Scopia ® Xt Series Software Using A Usb Drive - Avaya Scopia XT Series Deployment Manual

Advanced Configuration of the XT Series
2. Verify that your computer is connected to the network using a cable.
The upgrade could take too much time through a wifi network.
3. Download the upgrade package from the Avaya site to the computer.
The XT5000/XT4x00/XTE and XT7000 have two separate packages.
4. On the computer, launch the upgrade file.
5. Click to accept the license agreement.
6. Enter the IP address of the XT Series in the start screen and select Start.
The upgrade is transferred to the XT Series.
Caution:
After download begins do not shut down the XT Series until download is completed. At
the end of the update, the system reboots automatically.
7. The upgrade procedure may automatically continue after the reboot, and therefore reboot
again. Wait a few minutes to ensure that the upgrade procedure is completed.
Do not turn off the XT Series before the upgrade procedure is completed.
Related links
Updating the XT Series
Upgrading the Avaya Scopia
Drive
About this task
Your Avaya Scopia
December 2017
Figure 122: Upgrading the firmware of the XT Series
on page 178
®
®
XT Series can be updated by a USB drive containing the firmware.
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Figure 121: GLAN1 port
XT Series Software Using a USB
182