Pairing An Xt Remote Control Unit - Avaya Scopia XT Series Deployment Manual

Keyboard
Insert
Delete
Home
End
Page Up
Page Down
Arrow Up
Arrow Down
Arrow Left
Arrow Right
Mute (Ext. Keyboard)
Volume+ (Ext.
Keyboard)
Volume- (Ext. Keyboard)
Related links
Controlling the XT Series

Pairing an XT Remote Control Unit

Pairing an XT Remote Control Unit
About this task
If you have multiple XT Series units in the same room, you can pair a XT Remote Control Unit with
its XT Codec Unit so that every unit has its dedicated remote, so when you press a key on a
remote, it triggers an action on the correct XT Series unit. Enter the same numeric code in both
the XT Series and its XT Remote Control Unit to pair them. By default all remotes and endpoints
use the same code 01.
Procedure
1. Access the general settings. From the XT Series web interface, select Basic Settings >
General. From the endpoint's main menu, select Configure > General.
You can use the XT Remote Control Unit's initial default pairing to perform this task.
December 2017
Simplified Remote
Control
Call
Disconnect
Hold Ok (Menu)
Hold Near/Far (Inputs)
Zoom+
Zoom -
Arrow Up
Arrow Down
Arrow Left
Arrow Right
Mute
Volume+
Volume-
on page 63
on page 69
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
About the XT Remote Control Unit
Advanced Remote
Control
Call
Disconnect
Hold Ok (Menu)
Inputs
Zoom+
Zoom -
Arrow Up
Arrow Down
Arrow Left
Arrow Right
Mute
Volume+
Volume-
Notes/Tips
mode (1/a/A). Press OK
to place a call.
Use to switch rapidly
between local and
remote cameras.
Press and hold the Mute
key to toggle privacy.
69