Provisioning the XT Series
Result
If you pre-provision the endpoint and enter a full service code, a blue clock is displayed in the
Equinox Management list, indicating that the XT Series is ready to be provisioned but the code
has not been inserted yet. Once the provisioning is completed, the icon is replaced by the
standard icon.
If you post-provision the endpoint and enter a partial service code, a red clock is displayed in the
Equinox Management list. This is an alert for the Equinox Management administrator to indicate
that the XT Series is ready to be configured.
December 2017
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
84