Avaya Scopia XT Series Deployment Manual page 60

Setting Up the XT Series Hardware
2. Connect the computer audio to the audio-in
both analog and digital optical audio.
Important:
By default, participants in the meeting can hear your computer's audio even if you
mute the audio on the XT Series.
When you connect a computer's audio output to the XT Series, the echo cancellation for
this analog input is disabled by default (see
3. Set the computer's resolution by accessing the operating system graphics settings.
4. Select your screen resolution and refresh rates from the list of supported settings (see
Table 8: Supported computer monitor resolutions and refresh rates
December 2017
Figure 31: Connecting a computer's display to the XT Series
Figure 32: Connecting a computer's audio to the XT Series
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
port on the XT Codec Unit, which supports
Configuring Microphones on page 116).
on page 61).
60