Avaya Scopia XT Series Deployment Manual page 124

Advanced Configuration of the XT Series
• Use the H.323 name if this XT Series is registered to a gatekeeper. This is the same as the
System Name, unless you change it manually as described in
Gatekeeper Settings
• Use the hostname, which is the same as the system name, but some characters like a space
in the name are replaced by a hyphen.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Procedure
1. Access the system name settings. From the XT Series web interface, select
Administrator Settings > System > Location. From the endpoint's main menu, select
Configure > Advanced > System > Location.
2. Enter the following settings:
Table 30: Setting the display name
Field
System Name Display
Mode
December 2017
on page 134.
Figure 80: Selecting the system name
Description
Select the criterion for the system to display its name:
• Select Automatic to automatically choose the name based on deployment, first
displaying the SIP username if registered to a SIP registrar or proxy, and if
unavailable, it displays the H.323 name if registered to a gatekeeper, and if
unavailable it displays the unicode name.
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Configuring Advanced
on page 122.
Table continues...
124