Chapter 6: Provisioning The Xt Series; Provisioning Avaya Scopia ® Xt Series Endpoints Automatically - Avaya Scopia XT Series Deployment Manual

Chapter 6: Provisioning the XT Series

Provisioning Avaya Scopia
Automatically
About this task
You can provision an Avaya Scopia
receive the endpoint and set it up without any technical knowledge or intervention from the
Support team. During auto-provisioning, a service code is generated in Equinox Management to
identify the XT Series as a managed endpoint. When this service code is inserted into the XT
Series endpoint, the endpoint uses this service code to connect to a cloud service, to establish
communication with the relevant Equinox Management server. The following types of auto-
provisioning are enabled:
• Pre-provisioning: The endpoint receives a full service code, consisting of a 5-digit server
service code identifying the Equinox Management server, and a 7-digit endpoint service code
identifying the provisioned endpoint. During pre-provisioning, the endpoint profile is fully
prepared before it is installed at the customer site.
• Post-provisioning: The endpoint receives a partial service code, consisting only of the 5-
digit server service code identifying the Equinox Management server, while the 7-digit
endpoint service code is either empty or consists only of zeros. During post-provisioning, the
endpoint is added to the list of manageable endpoints, but is prepared (provisioned) at a later
time.
Note:
The XT Series Auto-Provisioning Service may be interrupted, including for maintenance,
repairs, upgrades, or equipment or network failures. Avaya may discontinue certain features
and the support for certain XT Series devices at any time. Events beyond Avaya control may
affect our service, such as force majeure events.
Procedure
1. Log into Equinox Management and select Settings > Endpoints > Auto-Provisioning.
The Auto-Provisioning page opens.
December 2017
®
®
XT Series endpoint remotely, so that the customer can
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
XT Series Endpoints
75