Avaya Scopia XT Series Deployment Manual page 86

Deploying the XT Series as a Server Only
For the serial port query, you need the RS232 cable with a mini-USB on one end and a nine-pin
serial port on the other, provided with the basic cable kit
page 86). You also need a serial port terminal application, such as SecureCRT or PuTTY.
Procedure
1. To discover the initial IP address with Bonjour auto-discovery:
a. Open Safari and navigate to the bookmarks.
b. Select Bonjour from the menu on the left.
A list of all devices in your network appear.
c. Find and double-click on your XT Series to open its web interface.
2. To discover the initial IP address with SNMP agent discovery:
a. Launch the SNMP scanner tool used in your organization to list all the SNMP devices
in your network.
b. Find your XT Series.
c. Open a web browser and enter the IP address.
3. To discover the initial IP address via the serial port:
a. Connect the mini-USB end of the serial port cable (provided) to the XT Codec Unit,
and the serial port to the computer.
December 2017
Figure 51: Serial port cable
Figure 52: Retrieving the XT Series IP address in Safari
Figure 53: Retrieving the XT Series IP address via SNMP agent discovery
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
(Figure 51: Serial port cable on
86