Avaya Scopia XT Series Deployment Manual page 83

3. Insert the service code and click Next.
You can enter a full service code, consisting of a 5-digit Server Service Code identifying
the Equinox Management server, and a 7-digit Endpoint Service Code identifying the
provisioned endpoint. Alternatively, you can enter a partial service code, consisting only of
the 5-digit Server Service Code identifying the Equinox Management server, while the 7-
digit Endpoint Service Code is either empty or consists only of zeros.
If the service code is correct and matches the value from Equinox Management, the Quick
Setup Wizard displays the name of the matching XT Series configuration. If the service
code is not correct or you do not accept the pre-configuration, you can return to the
previous step and proceed with a manual configuration. For more information, see
Configuring Basic Settings with the Quick Setup Wizard
4. Click Next.
The XT Series endpoint is configured and the Avaya Equinox Management Mode is set
to Cloud.
December 2017
Applying the Automatic Provisioning to Avaya Scopia
Figure 48: Quick Setup Wizard
Figure 49: Enter Service Code
Figure 50: Match Found
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
® XT Series Endpoints
on page 96.
83