Configuring Remember Favorite Layouts - Avaya Scopia XT Series Deployment Manual

Advanced Configuration of the XT Series
2. From the Wrap-around Menu menu, choose from the following options:
• Select Yes to enable wrap-around navigation. It is enabled by default.
• Select No to disable wrap-around navigation.
Note:
Wrap-around navigation is applied only to home screen panel, camera control panel,
and call control panel.
3. From the web interface only, select Save.
Related links
Advanced Configuration of the XT Series

Configuring Remember Favorite Layouts

About this task
You can configure the XT Series to change the default display to your preferred display according
to the number of available video flows and your Multi Image preferences. The available video
flows are local video, remote video, local or remote presentation. The available Multi Image Type
preferences are Picture-In-Picture (PIP), Picture-and-Picture (PAP), and Picture-on-Picture (POP).
For example, when Multi Image Mode is set to Auto and Multi Image Type is set to Auto, in a
single monitor configuration, the codec unit displays the following display when there is no
presentation (remote video in a big window and local video in a smaller window).
December 2017
Figure 111: Customization — General
on page 121
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
168