Avaya Scopia XT Series Deployment Manual page 36

Setting Up the XT Series Hardware
• Walls and furniture
Choose a plain neutral wall color. Avoid white walls as they increase the back light, causing
cameras to reduce exposure and introducing a silhouetting effect. Avoid glass walls, or
patterned and textured walls as they may cause visual disturbances.
The room should be well and uniformly lit, with a brightness of at least 300 lux, avoiding a
mixture of natural and artificial light. Light should come from the top of the conference table,
the front and the rear (for depth of field). If the only light is from the ceiling, it should be gentle
light and generate as little heat as possible.
Use heavy curtains with a neutral color and install carpets to reduce noise interference from
resonance with hard surfaces in the room.
The room should be air-conditioned to avoid the XT Codec Unit activating its fan.
• Camera positions
Ensure the camera's view captures all the seats in the room
all seats on page 37).
December 2017
Figure 8: Optimal Room Setup
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
(Figure 9: Camera scope covers
36