Applying The Automatic Provisioning To Avaya Scopia; Xt Series Endpoints - Avaya Scopia XT Series Deployment Manual

Provisioning the XT Series
If the endpoint has been post-provisioned (that is, only a server service code was provided
by Equinox Management with the endpoint, with no endpoint service code), the endpoint
displays in the table with a red 'clock' icon. This icon indicates that the endpoint is not yet
provisioned and needs the Equinox Management administrator to configure it.

Applying the Automatic Provisioning to Avaya Scopia

Series Endpoints
About this task
When you start the XT Series endpoints for the first time, the Quick Setup Wizard guides you
through the steps for applying the service code.
Procedure
1. Start the XT Series endpoint for the first time.
The Quick Setup Wizard is displayed.
2. Choose your preferred language and click Next.
December 2017
Figure 46: All Endpoints Table - Pre-provisioned Endpoint With Icon
Figure 47: Post-provisioned Endpoint With Icon
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
®
XT
82