Avaya Scopia XT Series Deployment Manual page 48

Setting Up the XT Series Hardware
Figure 20: Connecting the Avaya Scopia
3. Insert the three connectors of the camera cable (3 connectors on one side, 2 connectors
on the other side) to the sockets on the back of the camera:
• The DVI connector to the DVI socket
• The 8-pin connector to the IN RS232C socket
• The power connector to the DC IN 12V socket
December 2017
Figure 21: Connecting cables to the back of the camera
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
®
XT Camera Switch to the XT Codec Unit
48