Avaya Scopia XT Series Deployment Manual page 37

All cameras should be at a height to ensure eye contact between local and remote
participants.
Try positioning the camera between the two monitors either directly above or below them, at
a distance which captures all the seats.
Caution:
Do not place the camera on top of the XT Codec Unit. It can cause the system to
overheat.
Place chairs so that you and other participants appear in full frame of the cameras, in the
middle of the monitors.
For larger rooms, a single XT Series can manage more than one camera. For more
information, see
• Microphone positions
Place the Microphone Pod at the center of the table, in front of the participants. If you are
using stereo functions, please ensure that the pod is well centered. The Avaya Pod picks the
left channel audio from its left microphone, and the right channel audio from its right
microphone. The third microphone of the Avaya Pod is disabled when using stereo.
December 2017
Figure 9: Camera scope covers all seats
Connecting Cameras or DVD players
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Planning the Optimal Room Setup
on page 41.
37