Avaya Scopia XT Series Deployment Manual page 144

Advanced Configuration of the XT Series
Figure 94: Merging audio into two tracks and routing them to audio outputs
The web interface displays an interactive diagram of audio inputs to the left and outputs to
the right. Each entry is detailed in
Table 42: Configuring audio output settings
Field Name
Inputs > Digital Audio
Inputs > Echo Cancelled inputs
Inputs > Rx Remote
Inputs > Analog Audio
Inputs > HD
Outputs > HD1/HD2
Outputs > Digital Audio
December 2017
Table 42: Configuring audio output settings
Description
Refers to digital microphones (or other digital audio device)
connected to the
Refers to all the microphones deployed in the room for
capturing voices. To avoid echo or feedback loops, you
cannot route room microphones to track 1, which is the
default track for the main monitor's speakers (HD1).
Refers to the remote sound received from other endpoints
participating in a meeting.
Refers to an analog microphone (or other analog audio
device) connected to the
Refers to sound coming from an HDMI device.
Refers to a monitor or other HDMI device connected to the
HD1
Refers to a digital audio output device like an external
speaker connected to the
connector.
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
port via its mini-TOSlink connector.
port via its 3.5mm jack.
or HD2 port.
port via its mini-TOSlink
on page 144.
Table continues...
144