Avaya Scopia XT Series Deployment Manual page 120

Initial Configuration of the XT Series
Field Name
Mode
Ignore Mute
4. From the web interface only, select Save.
5. (Optional) If remote endpoints hear DVI audio when in use, verify the DVI video input is
enabled.
a. Access the DVI settings. From the XT Series web interface, select Administrator
Settings > I/O Connections > Cameras > DVI. From the endpoint's main menu,
select Configure > Advanced > I/O Connections > Cameras > DVI.
b. Verify that Enabled is set to Yes.
Related links
Initial Configuration of the XT Series
December 2017
Description
If you set the Type field to Line, the microphone has a separate
dedicated cable supplying electrical power (no phantom power).
Select one of the following (for analog audio input only):
• Stereo: The L/R stereo input cable is unbalanced (not specially
built to reduce interference even when the cable is long).
• Mono: The mono input cable is balanced (it reduces interference
when the cable is long).
(For analog and digital audio only) Select Yes to enable and
transmit presentation audio connected to the
main microphone is muted.
Note:
When Echo Canceller is set to Yes, this option is not
available and not visible.
on page 93
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
port when the
120