Avaya Scopia XT Series Deployment Manual page 170

Advanced Configuration of the XT Series
Figure 115: Changed Layout Option 2
Unless your configure Remember Favorite Layouts, the next time that you switch on the XT
Series, it reverts to the default display.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Procedure
1. Access the customization settings. From the XT Series web interface, select
Administrator Settings > System > Customization > General. From the endpoint's main
menu, select Configure > Advanced > System > Customization > General.
2. From the Remember Favorite Layout menu, choose from the following options:
• Select Never to always revert to the default layout. It is enabled by default.
• Select In a call to ensure that the codec unit uses the last layout used in the same call
for that combination of video flows. This means that the next time you receive a
presentation in the same call, you automatically see the last layout you chose (your
favorite one).
• Select Always to ensure that the codec unit uses the last layout used for that
combination of video flows. This means that the next time you receive a presentation in
December 2017
Figure 116: Customization — General
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
on page 122.
170