Chapter 7: Deploying The Xt Series As A Server Only; Finding The Ip Address For Web Access With No Monitor - Avaya Scopia XT Series Deployment Manual

Chapter 7: Deploying the XT Series as a
To deploy the Avaya Scopia
local audio and video of the system.
Related links

Finding the IP Address for Web Access with no Monitor

Registering the XT Series to IP Office
Disabling Local Audio and Video for Server Deployment
Finding the IP Address for Web Access with no Monitor
About this task
You can retrieve the IP address of your Avaya Scopia
Control Unit, for example, if your XT Series does not have a monitor. After retrieving the IP
address, you can configure the XT Series from its web interface.
There are three ways to discover the initial IP address:
• Using the network protocol Bonjour (recommended), which uses automatic discovery of
devices on the local network. While this is the simplest method, use an alternative method if
the device is on a different subnet and your network policy prevents Bonjour discovery of
devices on different subnets.
• Using SNMP agent discovery, a tool that allows discovery of SNMP agents on the network.
Use this if you are an administrator and the device is on a different subnet to your computer.
• Using serial port query, using only a terminal application like SecureCRT or PuTTY. This
method can also detect devices on a different subnet than your computer.
Before you begin
If you choose the Bonjour method, download the latest Apple Safari Internet Browser, which has
native Bonjour support, or download the Bonjour plugin for your favorite browser (see
www.apple.com/support/bonjour/).
For the SNMP method, verify you have an SNMP scanner tool, typically included in SNMP
monitoring software.
December 2017
Server Only
®
XT Series as a server only, register it with IP Office and disable the
on page 88
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
on page 85
on page 91
®
XT Series even without the XT Remote
http://
85