Configuring The Tcp Or Udp Port Range On The Avaya Scopia ® Xt Series - Avaya Scopia XT Series Deployment Manual

Video collaboration solution for ip office
Hide thumbs Also See for Scopia XT Series:
Table of Contents

Advertisement

Source
XT Series/SIP
Endpoint
XT Series/SIP
Endpoint
Related links
Implementing Port Security for the Avaya Scopia
Configuring the TCP or UDP Port Range on the Avaya Scopia
Series
About this task
You can configure the TCP or UDP port range by setting the base port, which is the lower end of
the port range (if, for example, port 3230 is busy).
The Avaya Scopia
• H.225.0: An H.323 protocol that specifies the messages and procedures used by
gatekeepers to set up calls.
• Q.931: A telephony protocol used for establishing and terminating the connection in H.323
calls.
• H.245: A Control Protocol used for multimedia communication; enables transferring
information about the device capabilities, as well as opening/closing the logical channels that
carry media streams.
• SIP: A signaling protocol used for creating, modifying, or terminating multimedia connections
between two or more participants.
The Avaya Scopia
and SIP media, including audio, video, and H.224/data (RTP), and media control (RTCP).
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
1
The ranges for dynamic ports are the maximum ones. The real port usage depends on the available licenses and on the
active features on the XT Series.
December 2017
Port
Protocol
Destinat
range
(Type)
ion
5061
SIP(TCP
XT
)
Series/SI
P EP
5070–
BFCP(U
XT
1
5077
DP)
Series/SI
P EP
®
XT Series uses dynamic TCP ports 3230-3250 for the following:
®
XT Series uses dynamic UDP ports 3230-3313 for enabling real-time H.323
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Implementing Port Security for the Avaya Scopia
Functionality
SIP call signaling for
TLS
SIP content
(presentation) video
signaling
®
XT Series
on page 24
on page 122.
®
XT Series
Result of Blocking
Require
Port on Firewall
d
Cannot connect SIP
Mandato
calls over TCP for
ry to
TLS.
support
SIP calls
on TCP
for TLS
No SIP content
Mandato
video available.
ry to
support
content
video in
SIP calls
®
XT
33

Advertisement

Table of Contents
loading

Table of Contents