Connecting Monitors To The Xt Series - Avaya Scopia XT Series Deployment Manual

Setting Up the XT Series Hardware
Figure 11: Small business topology using both network ports to connect to a private and public
Related links
Setting Up the XT Series Hardware

Connecting Monitors to the XT Series

About this task
Connect one or two monitors to the Avaya Scopia
endpoint, and to view the interface (menus) of the endpoint itself. Use the XT Remote Control Unit
to navigate these menus.
Each monitor is connected with an HDMI cable which can transmit both video and audio. You can
calibrate the monitor image position using the quick setup wizard (see
Position on page 98). To configure the advanced monitor settings like the resolution of one or two
monitors and the video layouts of embedded images, see
December 2017
on page 35
Figure 12: HDMI cable
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
network
®
XT Series to use it as a videoconferencing
Configuring Monitors
Adjusting the Image
on page 106.
40