Avaya Scopia XT Series Deployment Manual page 117

You define settings for each type of audio device, not per port on the XT Codec Unit. Therefore
there are separate settings for each type of microphone, even when some would share the same
type of connection.
Before you begin
Choose and then connect the analog audio equipment you need as described in
Microphones and Speakers to the XT Series
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Procedure
1. Access the Audio-Input settings. From the XT Series web interface, select Administrator
settings > I/O connections. From the endpoint's main menu, select Configure >
Advanced > I/O connections > Audio - Input.
2. Select the type of audio input you want to configure.
December 2017
Figure 75: Audio input ports on the XT Series
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
on page 52.
on page 122.
Configuring Microphones
Connecting
117