Avaya Scopia XT Series Deployment Manual page 70

Controlling the XT Series
2. Enter a two-digit numeric code between 01 and 96 in the Remote Control Code field.
3. From the web interface only, select Save.
4. On the Simplified XT Remote Control Unit, press the * and # keys simultaneously until its
RED light blinks twice. On the advanced remote control unit, press the RED and GREEN
keys simultaneously until the GREEN light becomes RED.
5. Using the keypad, type the same number used in the Remote control code field.
When the code is not the default 01, the system displays the paired remote icon with its
new code at the top-right corner of the screen.
December 2017
Figure 38: Setting the XT Remote Control Unit Code
Figure 39: Setting the code on the XT Remote Control Unit
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
[1...96]
70