Configuring Stereo On Avaya Pod Microphone - Avaya Scopia XT Series Deployment Manual

3. From the web interface only, select Save.
Related links
Advanced Configuration of the XT Series

Configuring Stereo on Avaya POD microphone

About this task
The Avaya Scopia
point to point calls when an Avaya POD microphone is used. Stereo audio is only available if it is
supported also by the remote party, when in a point to point SIP or H.323 call using AAC-LD, G.
719 or OPUS audio codecs. When stereo is active, the additional POD microphone does not
capture audio in the room, but it is available to mute/unmute the system.
Before you begin
Ensure that you have connected the Avaya POD microphone. Ensure that the pod is oriented
properly so that the microphones that are on the left and right of the horizontal Avaya logo on the
top of the pod capture the audio contributions for the left and right stereo channels.
Procedure
1. Access the audio settings. From the XT Series web interface, select Administrator
Settings > Calls > Preferences > Audio. From the endpoint's main menu, select
Configure > Advanced > Calls > Preferences > Audio.
2. From the Stereo menu, choose from the following options:
• Select Yes to enable stereo.
• Select No to disable stereo.
3. From the web interface only, select Save.
Related links
Advanced Configuration of the XT Series
December 2017
®
XT7000 Series and the Avaya Scopia
Figure 98: Avaya POD microphone
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Configuring Stereo on Avaya POD microphone
on page 121
®
XT5000 Series support stereo audio in
on page 121
149