Implementing External Api Control - Avaya Scopia XT Series Deployment Manual

A single gateway can serve multiple endpoints. For example, if your organization needs to enable
®
5 Avaya Scopia
one the Gateway for ISDN, which supports 5 concurrent calls of 256bps each.
With the gateway approach less communication lines are needed. As all gateways do not connect
at the same time and not all calls are ISDN, many more endpoints can share the same ISDN
connection and gateway.
Before you begin
Enable Peer-to-Peer mode in the Gateway for ISDN. For more information, see the Gateway
documentation.
Procedure
1. Access the XT Series web interface, as described in
page 71.
2. Select Administrator Settings > Protocols > ISDN.
3. Configure the ISDN settings as described below:
Table 4: Supporting ISDN Connectivity
Field
Enable
Gateway IP Address
4. Select Save.
Related links
Planning the Topology of the Avaya Scopia

Implementing External API Control

You can control the XT Codec Unit using the Avaya Scopia
with AMX, Creston, or Extron control devices). Contact Avaya customer support to receive the
latest Reference Guide for Avaya Scopia
over the Ethernet or RS232 interface.
December 2017
XT Series endpoints with ISDN connectivity (at a speed of 256bps), you can use
Figure 3: Enabling ISDN connectivity
Description
Select Yes to allow this Avaya Scopia
ISDN endpoints via the Gateway for ISDN.
Enter the IP address of the Gateway for ISDN used by your
organization.
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Accessing Web Interface
®
XT Series Deployment
®
XT Series API (requires integration
®
XT Series API, which includes the list of commands
Implementing External API Control
on
®
XT Series to quickly dial
on page 19
23